Single/Two Phase Thyristor Triggering Card – LTC-13
₹11,025
Prices are inclusive of Delivery Charges.
LTC-13-1 – Single Phase Thyristor Triggering / SCR Firing Card with Current Limit and Current Trip (w.r.t. Neutral).
LTC-13-2 – Two Phase Thyristor Triggering / SCR Firing Card with Current Limit and Current Trip.
LTC-13-DCR – Single and Two Phase Thyristor Triggering / SCR Firing Card suitable for DC full-wave Bridge Rectifier with shunt feedback (Full wave half control).
Download Catalog
Please refer the Ordering Information table before placing your order.
Libratherm offers SCR Firing / Thyristor Triggering Card LTC-13, which is designed to fire or trigger back to back connected SCRs or SCR/Diodes using synchronized phase angle control technique. This card accepts analog control signals of (0-5)/(0-10)VDC or (4-20)mA and provides proportional gate/cathode triggering pulses G1K1 + G2K2. These pulses can be used to trigger back-to-back connected SCRs up to 1000Amps with gate current up to 300mA. This card also provides a built-in regulated 5VDC supply to connect an external potentiometer to manually control the SCR Firing. The on-card ramp up and ramp down settings allows a gradual rise and fall of the voltage levels across the load.
Many times it is required to limit the current flowing through the load. Such a current limiting feature is available in LTC-13 – for single-phase, two-phase load, and three-phase. The load current or Line current feedback is derived from the external CTs. This feature is useful for transformer load or inductive loads or for heating elements like Silicon Carbide and Molybdenum Disilicide, which exhibits a significant change of resistance with an increase in temperature. This feature will restrict the maximum load current to the value set using the on card current limit (CL) potentiometer. On the sudden increase in the current, the current trip feature will over-ride the current limit feature and the firing of the thyristor will stop instantly. The trip contacts are available on the terminals.
This Thyristor Firing Card Module is designed for heating control applications to control the single-phase, two-phase, and three-phase AC power across the heating coils to control the star or delta connected transformer loads.
This Phase Angle SCR Triggering Card Module can also be used for half-wave, full-wave, or bridge rectifiers using SCR-DIODE or SCR-SCR Bridge, where the rectified DC output can be gradually varied to the desired level using the control signal or the potentiometer.
Key Features:
- Designed to fire 25 Amps to 1000 Amps SCR-SCR/SCR-Diode modules of Semikron, IXYS, IR, Proton, Eupac, Hind Rectifier, Ruttonsha.
- Single Phase / Two Phase
- Suitable for both star or delta or rectifier load configurations.
- Suitable for Single Phase, Two Phase Heaters, Transformers, DC Rectifiers.
- Auto / Manual operation.
- Accepts (4-20)mA / (0-5)VDC / (0-10)VDC / Potentiometer control inputs.
- Soft start and stop for smooth control.
- Adjustable power and current limit.
Technical Specification
Parameters | Description |
---|---|
Available Configurations | a) Single phase, Two phase, Three phase (3 or 4 wire star and 3 or 6 wire delta) for AC load and b) Single, Two or Three Phase rectifiers for DC load. |
Control Action | Phase angle control (self synchronized). |
Control Signal | (4-20)mA / (0-5)VDC / (0-10)VDC External potentiometer (any one). |
Output | Suitable Triggering Gate – Cathode pulses to fire back-to-back connected SCRs. 4 pulses (G1K1+ G2K2) for single or two phase control and 12 pulses for 3 phase control. Max. gate current = 300mA. |
Smooth Control | Adjustable Ramp Up and Ramp Down Time for the soft increase and decrease of the output voltage. |
Current Control | Current Limit and Current Trip settings using on card presets. |
Feedback is taken from external CT or Shunt. | |
Settings | For adjusting maximum and minimum voltage per phase. |
Digital I/O | Potential free Input contact to Enable/Disable the firing. Potential free Output contact for Over load current trip status. |
Load Type | Suitable for both resistive and inductive loads. (25A to 500A @ 230/415 VAC) |
Direction of Current Flow | LTC-13-1: P to N (Phase to Neutral – single phase) LTC-13-2: P1 to P2 (Phase to Phase – two phase) |
Aux. Supply Voltage | LTC-13-1: 230VAC (Single phase) LTC-13-2: 415 or 440VAC (Two phase) |
Size / Mounting | 110 x 135 x 70 - Flat plate mountable using 4 screws. |
Ordering Information
Model | Product Description | Part No. |
---|---|---|
LTC-13-1 | Single phase SCR triggering card with Current Limit and Current Trip feature 230VAC operated. | 2101 |
LTC-13-2 | Two phase SCR triggering card with Current Limit and Current Trip feature 415VAC operated. | 2102 |
LTC-13-1-DCR | Single phase SCR Triggering card suitable for DC full-wave bridge rectifier with shunt feedback - full-wave half control (2 SCRs + 2 DIODEs). | 2103-1 |
LTC-13-2-DCR | Two phase SCR Triggering card suitable for DC full-wave bridge rectifier with shunt feedback - full-wave half control (2 SCRs + 2 DIODEs). | 2103-2 |
Related products
-
Three Phase Thyristor Triggering Card – TSC-307
₹13,125Select optionsAdd to WishlistAdd to Wishlist -
Thyristor Switch Card for Capacitor Bank (Anodic Firing) – TSC-303
₹2,363 – ₹2,625Select optionsAdd to WishlistAdd to Wishlist -
Single Phase Thyristor Triggering Card – LZF-10
₹1,733Select optionsAdd to WishlistAdd to Wishlist